Frustrated By False Alarms? Try These Recommendations For Using Home Security Motion Sensors In Bowling Green
Have you ever been woken in the early hours of the morning by a false alarm triggered by a home security motion sensor? Having your sleep disrupted is bad enough, but it’s even more frustrating when you can’t determine what triggered the alarm. Thankfully, false alarms are usually easy to prevent. Follow these simple suggestions for using motion-activated devices and see how the proper positioning and maintenance will go a long way to reducing false alarms.
How To Minimize Motion Sensor False Alarms In Bowling Green
A vital part of your home’s protection, motion sensors typically get a poor reputation as a result of false alarms. While motion sensors are used in many components like lighting and video cameras, false alarms are typically associated with standalone devices positioned in corners of rooms. To prevent false alarms, avoid installing them in areas where they might be set off by the following:
- Pets climbing on furniture
- Spinning of ceiling fans
- Drapes or curtains swaying from your HVAC fan
- Temperature shifts due to the sun’s rays or heating equipment
You should also pay attention to upkeep. Low batteries will decrease performance and eventually lead to outages. Hardwired devices may have a pinched or damaged wire. You also need to clean occasionally, as various insects like to camp out in corners. As you’re tidying up, ensure the motion sensor housing is securely attached.
Thankfully, many top systems can minimize false alarms caused by pets by excluding animals less than 2 ½ feet tall and with a weight of 85 pounds or less. Review what devices can do before ordering to make certain you have the operability you need.
What’s The Ideal Spot For Bowling Green Motion Sensors?
Keep home security motion sensors elevated on walls so they are able to observe as much of your room as possible, including doors and windows. While putting them close to entryways could seem reasonable, this placement might reduce the complete coverage area. Besides, being located too close to a hot, sun-filled window might set off sensors that function by noticing heat surges. Reputable home security installers will guide you on the best placement.
How To Best Use Your Motion Sensors
Detecting intruders is the primary job of motion detectors, but there are various other reasons for implementing them. Here are just a few:
- Energy efficiency. Motion-sensing lighting saves energy by illuminating only when occupants are in the area. You may even link your sensor to a smart thermostat and automatically modify temperature settings based on whether your household is occupied.
- Keep track of family members. Motion sensors can update you when your kids come home from school.
- Initiate inside surveillance. You can set up your indoor cameras to start recording if a motion sensor discovers a disturbance.
When implementing a modern home defense system, you can program all types of customized automation with motion detectors.
Get Motion Sensors As Part Of Your Comprehensive Home Security Package in Bowling Green
Enjoy the top-notch protection you want for your household with a complete home security package in Bowling Green from Secure24 Alarm Systems. Our dependable motion-activated equipment may be integrated with other connected devices like cameras, lights, and thermostats. Contact (270) 262-8554 today and make your home a safer place.